If you are registering a ICV (Clubman, Cobra etc) in Australia you will need to have a seatbelt warning light to meet ADR requirements. There are a number of ways that the lamp is allowed to operate (for example linked to a switch in the seat), the easiest is just to run the lamp for a short time when the ignition is turned on.
The small (60x20mm) circuit will run the lamp for 20 to 30sec after power is supplied. When power turned off and on again the timing period restarts.
The circuit is a simple and robust. Power feed comes from ACC or ON ignition lines. The output can run a small bulb (2W max) an LED or the lamp in an OEM dash (where it needs to be grounded to operate).
The board is double heatshrinked and supplied with fly leads and wiring instructions, it is easily taped or cable tied to a harness or frame.
 | |
| The completed timer board, wrapped in heatshrink |
 |
| Dash lamp with symbol is also available |
The Timers can be purchased for $20 including shipping (Aus only)
If you want the lamp as well the package is shipped for $35.
For sales and enquiries please email me using the form on the right, or using this address info@migdevelopments.com
Below is a hook-up diagram covering a few diferent scenareos. Click on the image for a larger view.
